OCS/ocs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
dae6fc93f754d1221497352ff9ccb92b9aa0b281
ocs/plat/smpp/ut/conf/MIB_files/WXC2-MSC-MIB.txt
zhangsz dae6fc93f7 ocs init
2025-03-03 11:01:26 +08:00

4085 lines
104 KiB
Plaintext
Raw Blame History

WXC2-MSC-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, Integer32, Opaque
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, TruthValue
FROM SNMPv2-TC
App
FROM WXC2-SMI;
MSC OBJECT-IDENTITY
STATUS current
DESCRIPTION
"
Subsystems for msc .
"
::= { App 2 }
--
-- sub system CCF(MSC)
--
CCF(MSC) OBJECT-IDENTITY
STATUS current
DESCRIPTION
"
[SubSystem_Module]Subsystems for msc .
"
::= { MSC 2 }
CCF_Config OBJECT-IDENTITY
STATUS current
DESCRIPTION
"
Configuration for CCF .
"
::= { CCF(MSC) 2 }
--
-- CCF -> Configuration -> Call Routing
--
Call_Routing OBJECT-IDENTITY
STATUS current
DESCRIPTION
"
Call Routing .
"
::= { CCF_Config 1 }
Prefix_Assignment OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 8
Default : EEEEEEEEEEEEEEEE
Field : [1]Prefix
{
[u]0.0-7.7
[u]input
[v]keepHex-low-E
}
Remark: 4 bytes are used to set a 8-digit prefix for dialed number.
Prefix is the first layer for dialed number based call routing. If the dialed number of a call matches a pre-programmed prefix in this table, this call will be routed to a certain trunk group, subsequently that trunk group will route this call via a dedicated E1 port.This system has totally 256 prefixes.
Dialed number without matching a pre-programmed prefix will be routed to the default trunk group 0.
Prefix 252 is for default international call, all internation calls unable to be routed out will be routed from the trunk group assigned to prefix 252, keep default EEEEEEEE.
Prefix 253 is for default national call, all national calls unable to be routed out will be routed from the trunk group assigned to prefix 253, keep default EEEEEEEE.
Prefix 254 is for default subscriber call, all dialed MSISDN unable to be routed out will be routed from the trunk group assigned to prefix 254, keep default EEEEEEEE.
Prefix 255 is for unknown call, all unknown calls unable to be routed out will be routed from the trunk group assigned to prefix 255, keep default EEEEEEEE.
E=End tag, C='#', B='*'.
Default=0xEEEEEEEE.
[End]
"
::= { Call_Routing 1 }
Prefix_Attributes OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 18
Default : 2200EEEEEEEEEEEEEEEE010800EEEEEEEE03
Flag : E10
Field : [1]TON incoming call
{
[u]0.0-0.3
[u]select
[v]0[opt]Spare
[v]1[opt]MSISDN
[v]2[opt]Unkown
[v]3[opt]NDD
[v]4[opt]IDD
[v]5[opt]Spare
}
[2]TON outgoing call
{
[u]0.4-0.7
[u]select
[v]0[opt]Spare
[v]1[opt]MSISDN
[v]2[opt]Unkown
[v]3[opt]NDD
[v]4[opt]IDD
[v]5[opt]Spare
}
[3]Out trunk deletion count
{
[u]1.0-1.3
[u]select
[v]0[opt]Delete none
[v]1[opt]1
[v]2[opt]2
[v]3[opt]3
[v]4[opt]4
[v]5[opt]5
[v]6[opt]6
[v]7[opt]7
[v]8[opt]8
[v]9[opt]9
[v]10[opt]10
[v]11[opt]11
[v]12[opt]12
[v]13[opt]13
[v]14[opt]14
[v]15[opt]15
}
[4]Out trunk insertion count
{
[u]1.4-1.7
[u]select
[v]0[opt]Insert none
[v]1[opt]1
[v]2[opt]2
[v]3[opt]3
[v]4[opt]4
[v]5[opt]5
[v]6[opt]6
[v]7[opt]7
[v]8[opt]8
[v]9[opt]9
[v]10[opt]10
[v]11[opt]11
[v]12[opt]12
[v]13[opt]13
[v]14[opt]14
[v]15[opt]15
}
[5]Out trunk inserted digits
{
[u]2.0-9.7
[u]input
[v]keepHex-low-E
}
[6]CDR on/off
{
[u]10.0-10.0
[u]select
[v]0[opt]Off
[v]1[opt]On
}
[7]Reserved
{
[u]10.1-10.1
[u]select
}
[8]Properties
{
[u]10.2-10.3
[u]select
[v]0[opt]Trunk
[v]1[opt]MSISDN
[v]2[opt]MSRN
[v]3[opt]MSC
}
[9]Call type
{
[u]10.4-10.6
[u]select
[v]0[opt]Normal Call
[v]1[opt]Emergency
[v]2[opt]MCT
[v]3[opt]VMS
[v]4[opt]IN
}
[10]Enable
{
[u]10.7-10.7
[u]select
[v]0[opt]N
[v]1[opt]Y
}
[11]Length of dialed number
{
[u]11.0-11.7
[u]input
[v]toDec-high-0
}
[12]E.164 International deletion count
{
[u]12.0-12.3
[u]select
[v]0[opt]Delete none
[v]1[opt]Delete first one
[v]2[opt]Delete first two
[v]3[opt]Delete first three
[v]4[opt]Delete first four
[v]5[opt]Delete first five
[v]6[opt]Delete first six
[v]7[opt]Delete first seven
[v]8[opt]Delete first eight
}
[13]E.164 International insertion count
{
[u]12.4-12.7
[u]select
[v]0[opt]Insert none
[v]1[opt]Insert first one
[v]2[opt]Insert first two
[v]3[opt]Insert first three
[v]4[opt]Insert first four
[v]5[opt]Insert first five
[v]6[opt]Insert first six
[v]7[opt]Insert first seven
[v]8[opt]Insert first eight
}
[14]E.164 international inserted digits
{
[u]13.0-16.7
[u]input
[v]keepHex-low-E
}
[15]Cli-type
{
[u]17.0-17.7
[u]select
[v]0[opt]Sub
[v]1[opt]NDD
[v]2[opt]IDD
[v]3[opt]Unknown(local)
[v]4[opt]Unknown(NDD)
[v]5[opt]Unknown(IDD)
}
Remark: Enable: Y=prefix enable, N=prefix disable.
TON incoming call: Type of number for incoming call, include unknown, MSISDN, NDD and IDD. It is specified by originating node for terminating node to route this call with proper dialed number manipulation.
For system subscriber dialed prefix, always use unknown for In-TON except the prefix of international prefix beginning with a . For this kind of prefix (such as 86755832) we should set the In-TON as IDD to support dialing.
TON outgoing call: Type of number for outgoing call, include unknown, MSISDN, NDD and IDD. It specifies the type of an outgoing call for terminating node to route this call with proper dialed number manipulation. Generally the MSC uses IDD for outgoing call.
Out trunk deletion count: Quantity of deleted digit of a dialed number beginning with this prefix. It ranges from 0 to 8. 0=no deletion, 1-8=delete first 1-8 digits.
Out trunk insertion count: Quantity of inserted digit for a dialed number beginning with this prefix. It ranges from 0 to 8. 0=no insertion, 1-8=insert 1-8 digits from the beginning of this number.
Out trunk inserted digits: 8 digits ranging from EEEEEEEE to 99999999, E=any decimal number.
CDR on/off: Turn on/off the CDR of dialed numbers beginning with this prefix.
Properties: Specify the properties of a prefix. Trunk=to PSTN, MSISDN=to A interface, MSRN=MS roaming number, MSC=to peer MSC.
Call type: Normal=no verification for MT, Emergency call=no verification for MO (free call), MCT=Malicious Call Trace, VMS call=send signaling carried DTMF to VMS.
Length of dialed number: Length of dialed number (1-32).
E.164 international deletion count: Quantity of deleted digit of E164 international number, always use IDD for outgoing call for PPS debiting.
E.164 international insertion count: Quantity of inserted digit of E164 international number, always use IDD for outgoing call for PPS debiting.
E.164 international inserted digits: Inserted digit to the E164 international number, 8 digits ranging from EEEEEEEE to 99999999, E=any decimal number, always use IDD for outgoing call for PPS debiting.
[End]
"
::= { Call_Routing 2 }
Prefix_TG OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field:
[1]Assign TG to prefix
{
[u]0.0-0.7
[u]input
[v]toDec-high-0
}
Remark: Assign a trunk group for each prefix for call routing, a single prefix points to only one trunk group, multiple prefix can be assigned the same trunk group, default is the no. of the prefix.
[End]
"
::= { Call_Routing 3 }
TG_Attributes OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 10
Default : 00000000000000000000000000
Flag : E2
Field: [1]DPC
{
[u]0.0-3.7
[u]input
[v]keepHex-high-0
}
[2]TG flag
{
[u]4.0-4.0
[u]select
[v]0[opt]Disable
[v]1[opt]Enable
}
[3]CDR on/off
{
[u]4.1-4.1
[u]select
[v]0[opt]Off
[v]1[opt]On
}
[4]Announcement
{
[u]4.2-4.2
[u]select
[v]0[opt]Off
[v]1[opt]On
}
[5]TG category
{
[u]4.3-4.5
[u]select
[v]0[opt]PSTN
[v]1[opt]HPLMN
[v]2[opt]VHLMN
[v]3[opt]SUB
[v]4[opt]IP
[v]5[opt]Intercept
}
[6]Alternative TG flag
{
[u]4.6-4.6
[u]select
[v]0[opt]Disable
[v]1[opt]enable
}
[7]Loopback
{
[u]4.7-4.7
[u]select
[v]0[opt]Disable
[v]1[opt]Enable
}
[8]Network indicator
{
[u]5.0-5.7
[u]select
[v]0[opt]International
[v]1[opt]International spare
[v]2[opt]National
[v]3[opt]National spare
}
[9]Circuit selection
{
[u]6.0-6.1
[u]select
[v]0[opt]Clockwise
[v]1[opt]Anti-clockwise
[v]2[opt]Odd
[v]3[opt]Even
}
[10]Back off
{
[u]6.2-6.2
[u]select
[v]0[opt]Off
[v]1[opt]On
}
[11]Reserved
{
[u]6.3-6.4
[u]select
}
[12]MPTY
{
[u]6.5-6.5
[u]select
[v]0[opt]Disable
[v]1[opt]Enable
}
[13]Location
{
[u]6.6-6.7
[u]select
[v]0[opt]MSC-0
[v]1[opt]MSC-1
[v]2[opt]Both
[v]3[opt]Spare
}
[14]Alternative TG
{
[u]7.0-7.7
[u]input
[v]toDec-high-0
}
[15]Tandem restriction
{
[u]8.0-8.7
[u]select
[v]0[opt]Disable
[v]1[opt]Enable
}
[16]Incoming Call type
{
[u]9.0-9.7
[u]select
[v]0[opt]Normal
[v]1[opt]IN
}
Remark: DPC: Destination point code of this trunk group.
TG flag: enable or disable this trunk group.
CDR on/off: CDR on or off option for this trunk group.
Announcement: Voice announcement enable or disable for this trunk group.
TG category: PSTN=to PSTN, IP=to VMS and VPS, HPLMN=to HPLMN, VPLMN=to VPLMN, SUB=to BSC, Intercept=to intercept LEA
Alternative TG flag: Alternative trunk group enable or disable option.
Alternative TG: Alternative trunk group for backup purpose.
Loop back: Incoming call loop back enable or disable, used for MSC loop back.
Network indicator: Specify network type, International, International spare , National, National spare.
Circuit selection: Preferred circuit selection mode, include clockwise, anti-clockwise, odd and even.
Back off: Back off on or off when simultaneously select the same channel with the opposite side.
Location: For normal trunk group, select Both. For a trunk group to a VPS, configure this trunk group as MSC0 or MSC1.
MPTY: Multi-party call enable or disable. For all trunk groups to BSC, select Enable.
Tandem restriction:Y: Tandem disabled. Not support transit call from PSTN to PSTN via this trunk group.
N: Tandem enabled. Support transit call from PSTN to PSTN via this trunk group.
[End]
"
::= { Call_Routing 4 }
Call_Routing_CDR_Flag OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 2
Default : 03FF
Field : [1]Reserved
{
[u]0.3-0.7
[u]select
}
[2]Redirection
{
[u]0.3-0.3
[u]select
[v]0[opt]off
[v]1[opt]on
}
[3]Feature Request
{
[u]0.2-0.2
[u]select
[v]0[opt]off
[v]1[opt]on
}
[4]Sorm
{
[u]0.1-0.1
[u]select
[v]0[opt]off
[v]1[opt]on
}
[5]MCT
{
[u]0.0-0.0
[u]select
[v]0[opt]off
[v]1[opt]on
}
[6]MT SM
{
[u]1.7-1.7
[u]select
[v]0[opt]off
[v]1[opt]on
}
[7]MO SM
{
[u]1.6-1.6
[u]select
[v]0[opt]off
[v]1[opt]on
}
[8]Transit call
{
[u]1.5-1.5
[u]select
[v]0[opt]off
[v]1[opt]on
}
[9]Gateway outgoing call
{
[u]1.4-1.4
[u]select
[v]0[opt]off
[v]1[opt]on
}
[10]Gateway incoming call
{
[u]1.3-1.3
[u]select
[v]0[opt]off
[v]1[opt]on
}
[11]Roaming call
{
[u]1.2-1.2
[u]select
[v]0[opt]off
[v]1[opt]on
}
[12]MT call
{
[u]1.1-1.1
[u]select
[v]0[opt]off
[v]1[opt]on
}
[13]MO call
{
[u]1.0-1.0
[u]select
[v]0[opt]off
[v]1[opt]on
}
Remark: Sorm: call intercept MCT: malicious call trace
Default=CDR of MO call and MT call is enabled, CDR of roaming call, gateway incoming call, gateway outgoing call, transit call, MO SMS and MT SMS is disabled.
[End]
"
::= { Call_Routing 5 }
Voice_Prompt_Announcement_option OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance : 1
Length : 16
Default : 00000000000000000000000000000000
Field : [1]Announcement 0
{
[u]0.0-0.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[2]Announcement 1
{
[u]1.0-1.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[3]Announcement 2
{
[u]2.0-2.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[4]Announcement 3
{
[u]3.0-3.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[5]Announcement 4
{
[u]4.0-4.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[6]Announcement 5
{
[u]5.0-5.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[7]Announcement 6
{
[u]6.0-6.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[8]Announcement 7
{
[u]7.0-7.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[9]Announcement 8
{
[u]8.0-8.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[10]Announcement 9
{
[u]9.0-9.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[11]Announcement 10
{
[u]10.0-10.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[12]Announcement 11
{
[u]11.0-11.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[13]Announcement 12
{
[u]12.0-12.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[14]Announcement 13
{
[u]13.0-13.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[15]Announcement 14
{
[u]14.0-14.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
[16]Announcement 15
{
[u]15.0-15.7
[u]select
[v]0[opt]None
[v]1[opt]Tone
[v]2[opt]Voice
[v]3[opt]lease line
}
Remark : Set to play either announcement or tone indicating call unattainable reason for subscribers. System has total 8 announcements and tones that can be independently set.
Announcement 0: The dialed number is invalid.
Announcement 1: The subscriber dialed is not activated.
Announcement 2: The subscriber is busy.
Announcement 3: The network is busy.
Announcement 4: Caller's account was deactivated.
Announcement 5: The subscriber dialed was deactivated.
Announcement 6: Feature not available to caller.
Announcement 7: The subscriber dialed is not available.
[End]
"
::= { Call_Routing 6 }
Call_Routing_Warning OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 1
Default : 32
Field : [1]Remanent time for warning tone
{
[u]00.0-00.7
[u]input
[v]toDec-high-0
}
Remark :Set time to play prompt tone for reaching zero balance prepaid subscriber when a call is in progress, unit is second. e.g. if set as 60, the system will play prompt tone one minute before a subscriber uses up his balance.
[End]
"
::= { Call_Routing 7 }
--
-- CCF -> Configuration -> MSC
--
CCF_MSC OBJECT-IDENTITY
STATUS current
DESCRIPTION
"CCF Configuration MSC ."
::= { CCF_Config 2 }
Emergency_Call OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 21
Default : 0000000000EEEEEEEEEEEEEEEE112EEEEEEEEEEEEE
Flag : E1
Field : [1]Enable flag
{
[u]00.0-00.7
[u]select
[v]0[opt]Disable
[v]1[opt]Enable
}
[2]LAC
{
[u]01.0-02.7
[u]input
[v]toDec-high-0
}
[3]CI
{
[u]03.0-04.7
[u]input
[v]toDec-high-0
}
[4]Dial number
{
[u]05.0-12.7
[u]input
[v]keepHex-low-E
}
[5]Local emergency number
{
[u]13.0-20.7
[u]input
[v]keepHex-low-E
}
Remark: Emergency call number. Default=112.
[End]
"
::= { CCF_MSC 5 }
Location_Management OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 8
Default : 0000000000000000
Flag : E1
Field : [1]Enable
{
[u]0.0-0.7
[u]select
[v]0[opt]N
[v]1[opt]Y
}
[2]TG
{
[u]01.0-01.7
[u]input
[v]toDec-high-0
}
[3]LAC
{
[u]02.0-03.7
[u]input
[v]toDec-high-0
}
[4]CI
{
[u]04.0-05.7
[u]input
[v]toDec-high-0
}
[5]Zone Code
{
[u]06.0-07.7
[u]input
[v]toDec-high-0
}
Remark :Manage the MS location by correlate TG (trunk group), LAC (location area code, cell ID and zone code, totally 256 location management.
[End]
"
::= { CCF_MSC 8 }
--
-- CCF -> Configuration -> CPC Management
--
CPC OBJECT-IDENTITY
STATUS current
DESCRIPTION
"CPC Management."
::= { CCF_Config 3 }
SRF_Address OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 8
Default : 8675500000000009
Field : [1]EIR number
{
[u]00.0-07.7
[u]input
[v]keepHex-low-E
}
Remark: E.164 number of HLR server:HLR MSISDN used for SCCP addressing, F=end tag.
Default=91867555950502FFFF=91867555950502.
[End]
"
::= { CPC 3 }
Max_Call_Duration OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 1
Default : 3C
Field : [1]Max. call duration
{
[u]0.0-0.7
[u]input
[v]toDec-high-0
}
Remark : Define the permitted maximum call duration. Any ongoing call reaching this duration threshold will be compulsively cut off. byte value: 0=disable this function, 1-255=max. call duration, unit=minute. Default=0.
[End]
"
::= { CPC 7 }
--
-- CCF -> Configuration -> E1 Port
--
E1_Port OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E1 Port."
::= { CCF_Config 4 }
E1_Interface OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]E1 interface
{
[u]0.0-0.7
[u]select
[v]0[opt]TUP
[v]1[opt]ISUP
[v]2[opt]AIF
[v]3[opt]AIF CDMA2K
[v]4[opt]BICC
[v]5[opt]CI-CNF
[v]6[opt]CI-loopback
}
Remark: Set the type of E1 interface for 256 E1 ports.
[End]
"
::= { E1_Port 1 }
E1_TG OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : EE
Field : [1]Assign TG
{
[u]0.0-0.7
[u]input
[v]toDec-high-0
}
Remark :Assign a trunk group to each E1 port for call routing. A single E1 port points to only one trunk group, multiple E1 port can be assigned the same trunk group. Default=number of the E1 port.
[End]
"
::= { E1_Port 2 }
E1_CIC OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 4
Default : 00000000
Field : [1]E1 CIC
{
[u]0.0-3.7
[u]input
[v]toDec-high-0
}
Remark :Circuit identity code, uniquely identify each circuit within a trunk group. CIC of both ends of a circuit must be identical. 256 CIC for dual MSC platform 256 E1 ports.
[End]
"
::= { E1_Port 3 }
E1_Media_Control_Attributes OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 4
Default : 00000000
Field : [1]E1 Control Protocol Type
{
[u]0.0-0.7
[u]select
[v]0[opt]Internal
[v]1[opt]MGCP
}
[2]E1 Enable
{
[u]1.0-1.7
[u]select
[v]0[opt]Disable
[v]1[opt]Enable
}
[3]MG Number
{
[u]2.0-2.7
[u]input
[v]toDec-high-0
}
[4]Trunk Number
{
[u]3.0-3.7
[u]input
[v]toDec-high-0
}
Remark :E1 Media Control Attributes
[End]
"
::= { E1_Port 4 }
--
-- CCF -> Configuration -> Channel attributes
--
Channel_Attributes OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Channel attributes."
::= { CCF_Config 5 }
Card0_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 1 }
Card1_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 2 }
Card2_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 3 }
Card3_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 4 }
Card4_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 5 }
Card5_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 6 }
Card6_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 7 }
Card7_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 8 }
Card8_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 9 }
Card9_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 10 }
Card10_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 11 }
Card11_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 12 }
Card12_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 13 }
Card13_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 14 }
Card14_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 15 }
Card15_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 16 }
Card16_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 17 }
Card17_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 18 }
Card18_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 19 }
Card19_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 20 }
Card20_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 21 }
Card21_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 22 }
Card22_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 23 }
Card23_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 24 }
Card24_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 25 }
Card25_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 26 }
Card26_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 27 }
Card27_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 28 }
Card28_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 29 }
Card29_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 30 }
Card30_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 31 }
Card31_Channel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 3
Default : 05EEEE
Flag : E1
Field : [1]Channel flag
{
[u]00.0-00.0
[u]select
[v]0[opt]disable
[v]1[opt]enable
}
[2]Channel type
{
[u]00.1-00.2
[u]select
[v]0[opt]incoming
[v]1[opt]outgoing
[v]2[opt]bi-direction
[v]3[opt]lease
}
[3]Reserved
{
[u]00.3-00.7
[u]select
}
[4]LCCP card (0-15)
{
[u]01.0-01.3
[u]input
[v]toDec-high-0
}
[5]Reserved
{
[u]01.4-01.7
[u]select
}
[6]LCCP timeslot (1-15, 17-31)
{
[u]02.0-02.4
[u]input
[v]toDec-high-0
}
[7]LCCP E1 (0-7)
{
[u]02.5-02.7
[u]input
[v]toDec-high-0
}
Remark: Set lease circuit of MSC. Each 8K E1 Card has 256 configurable channels.
LCCP card (0-15)=Lease circuit connected 8K E1 Card (0-15).
LCCP E1 (0-7)=Lease circuit connected E1 (0-7).
LCCP timeslot=Lease circuit connected timeslot (1-15,17-31).
Default=0x05EEEE.
[End]
"
::= { Channel_Attributes 32 }
--
--CCF -> CPC_attributes
--
CPC_attributes OBJECT-IDENTITY
STATUS current
DESCRIPTION
"CPC attributes."
::= { CCF_Config 6 }
MSCID OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 3
Default : 000000
Field : [1]Market ID
{
[u]0.0-1.7
[u]input
[v]toDec-high-0
}
[2]Switch Number
{
[u]2.0-2.7
[u]input
[v]toDec-high-0
}
Remark: MSCID
[End]
"
::= { CPC_attributes 3 }
--
-- CCF -> Media_gateway
--
Media_gateway OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Media_gateway ."
::= { CCF_Config 7 }
MG_Attribute OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 53
Default : 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Field : [1]MG Enable
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Enable
}
[2]MG IP Address
{
[u]1.0-4.7
[u]input
[v]keepHex-high-0
}
[3]MG Name
{
[u]5.0-52.7
[u]input
[v]toAscii-low-0
}
Remark: MG Attributes
[End]
"
::= { Media_gateway 1 }
--
-- CCF -> CCF_Status
--
CCF_Status OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Status for CCF ."
::= { CCF(MSC) 3 }
Version OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 3
Default : 000000
Field :
Remark : Version of MSC software (Read only).<br>
Byte0: System release version number, based on basic function and structure.<br>
Byte1: Software module version number, based on software module.<br>
Byte2: Test version, 0=Release version number, 1=Test version number..
[End]
"
::= { CCF_Status 1 }
Command OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 1
Default : EE
Flag : S1.3
Field : [1]Command
{
[u]0.0-0.7
[u]select
[v]90[opt]Reset
[v]165[opt]Initialize
[v]181[opt]Save parameter
[v]238[opt]No command
}
Remark: Control command for MSC-CPC.
Reset: Used for CPC status initialization.
Initialize: Restore the parameter setup to the default factory setting.
Save parameter: Save the parameters residing in CPC's memory into CPC's harddisk.
[End]
"
::= { CCF_Status 2 }
E1_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 128
Length : 1
Default : EE
Field : [1]Quantity of occupied timeslot
{
[u]0.0-0.4
[u]input
[v]toDec-high-0
}
[2]E1 type
{
[u]0.5-0.7
[u]select
[v]0[opt]TUP
[v]1[opt]ISUP
[v]2[opt]AIF
[v]3[opt]AIF_CDMA2K
[v]4[opt]BICC
}
Remark : E1 status (read only).
[End]
"
::= { CCF_Status 4 }
Channel_Status OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Channel status (read only)."
::= { CCF_Status 5 }
Card0_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 1 }
Card1_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 2 }
Card2_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 3 }
Card3_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 4 }
Card4_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 5 }
Card5_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 6 }
Card6_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 7 }
Card7_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 8 }
Card8_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 9 }
Card9_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 10 }
Card10_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 11 }
Card11_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 12 }
Card12_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 13 }
Card13_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 14 }
Card14_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 15 }
Card15_Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 256
Length : 1
Default : 00
Field : [1]Timeslot status
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Idle
[v]2[opt]Busy
[v]3[opt]Local blocked
[v]4[opt]Remote blocked
}
Remark: Card Channel status (read only).
[End]
"
::= { Channel_Status 16 }
--
-- sub system VLR
--
VLR OBJECT-IDENTITY
STATUS current
DESCRIPTION
"
[SubSystem_Module]sub for VLR .
"
::= { MSC 5 }
--
-- VLR -> Configuration
--
VLR_Config OBJECT-IDENTITY
STATUS current
DESCRIPTION
"
Configuration for VLR .
"
::= { VLR 2 }
Public_Param OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Public parameters . "
::= { VLR_Config 1 }
OptAuthReq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance : 1
Length : 1
Default : 00
Field : [1]Update Location
{
[u]00.0-00.0
[u]select
[v]0[opt]No authetication
[v]1[opt]Authetication
}
[2]MO
{
[u]00.1-00.1
[u]select
[v]0[opt]No authetication
[v]1[opt]Authetication
}
[3]MT
{
[u]00.2-00.2
[u]select
[v]0[opt]No authetication
[v]1[opt]Authetication
}
[4]Spare
{
[u]00.3-00.7
[u]input
[v]toDec-high-0
}
Remark :Flag of SIM authentication on MS poweron and MO/MT call.
[End]
"
::= { Public_Param 1 }
OptReuseTriplets OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 1
Default : 00
Field : [1]OptReuseTriplets
{
[u]00.0-00.0
[u]select
[v]0[opt]Disable
[v]1[opt]Enable
}
[2]double authentication
{
[u]00.1-00.1
[u]select
[v]0[opt]Disable
[v]1[opt]Enable
}
[3]Spare
{
[u]00.2-00.7
[u]input
[v]toDec-high-0
}
Remark: Flag of reusing authentication triplets in VLR in the case that authentication to HLR is not available. Default=disable.
[End]
"
::= { Public_Param 2 }
OptCipReq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 1
Default : 00
Field : [1]OptCipReq
{
[u]00.0-00.7
[u]select
[v]0[opt]Disable
[v]1[opt]Enable
}
Remark : Flag of voice ciphering over air interface by MS. Default=Disable.
[End]
"
::= { Public_Param 3 }
OptCiphAlgo OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 4
Default : 00000000
Field : [1]OptCiphAlgo
{
[u]00.0-00.7
[u]select
[v]0[opt]None
[v]1[opt]A5_1
[v]2[opt]A5_2
[v]3[opt]A5_3
[v]4[opt]A5_4
[v]5[opt]A5_5
[v]6[opt]A5_6
[v]7[opt]A5_7
}
Remark : Voice ciphering algorithm selection. Default=no ciphering.
[End]
"
::= { Public_Param 4 }
OptTmsiAlloc OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 1
Default : 01
Field : [1]TMSI Allocation Option
{
[u]0.0-0.7
[u]select
[v]0[opt]Disable
[v]1[opt]Allocate TMSI
[v]2[opt]Reallocate TMSI
}
Remark :Flag of allocating a new TMSI every time a call management service is requested. Default=Disable.
[End]
"
::= { Public_Param 5 }
OptEcSetUpAllow OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 1
Default : 01
Field : [1]OptEcSetUpAllow
{
[u]00.0-00.7
[u]select
[v]0[opt]Disable
[v]1[opt]Enable
}
Remark : Flag of making emergency call for non-registered MS or MS without SIM. Default=Enable.
[End]
"
::= { Public_Param 7 }
OptCheckIMEI OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 1
Default : 00
Field : [1]Update Location
{
[u]00.0-00.0
[u]select
[v]0[opt]No IMEI verification
[v]1[opt]IMEI verification
}
[2]MO
{
[u]00.1-00.1
[u]select
[v]0[opt]No IMEI verification
[v]1[opt]IMEI verification
}
[3]MT
{
[u]00.2-00.2
[u]select
[v]0[opt]No IMEI verification
[v]1[opt]IMEI verification
}
[4]Spare
{
[u]00.3-00.7
[u]input
[v]toDec-high-0
}
Remark : Flag of IMEI verification via EIR. Default=no IMEI verification.
[End]
"
::= { Public_Param 8 }
OptVlrPurge OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 1
Default : 00
Field : [1]OptVlrPurge
{
[u]00.0-00.7
[u]select
[v]0[opt]Off
[v]1[opt]On
}
Remark : Flag of VLR purge. Default=Off.
[End]
"
::= { Public_Param 9 }
IdlePeriod2Purge OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 1
Default : 3C
Field : [1]IdlePeriod2Purge
{
[u]00.0-00.7
[u]input
[v]toDec-high-0
}
Remark : Set the threshold of idle time to purge. If a mobile's idle time reaches this threshold, VLR will purge all records of this MS, unit=6 minute. Default=60minutes.
[End]
"
::= { Public_Param 10 }
CDR_Flag OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 1
Default : 01
Field : [1]CDR on/off
{
[u]00.0-00.7
[u]select
[v]0[opt]Off
[v]1[opt]On
}
Remark : VLR CDR flag. Default=On.
[End]
"
::= { Public_Param 11 }
MSRN OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 16
Default : 8675531240000FFF8675531241000FFF
Field : [3]Start number
{
[u]00.0-07.7
[u]input
[v]keepHex-low-F
}
[4]End number
{
[u]08.0-15.7
[u]input
[v]keepHex-low-F
}
Remark : Mobile station roaming number, use 16 bytes (32 digits) to define a range of MSRN. The length of start MSRN and end MSRN must be identical. F=end tag.
[End]
"
::= { Public_Param 13 }
--
-- VLR -> Management
--
VLR_Management OBJECT-IDENTITY
STATUS current
DESCRIPTION
"
Management for VLR .
"
::= { VLR 3 }
Version OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 3
Default : 000000
Field :
Remark : Version of VLR software (Read only).
Byte0: System release version number, based on basic function and structure.
Byte1: Software module version number, based on software module.
Byte2: Test version, 0=Release version number, 1=Test version number.
[End]
"
::= { VLR_Management 2 }
Command OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS write-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 1
Default : EE
Flag : S1.2
Field : [1]Management
{
[u]00.0-00.7
[u]select
[v]0[opt]Reset VLR
[v]1[opt]Save parameters
}
Remark : Control command for VLR.
Reset: Used to initialize the status of VLR.
Save parameters: Save the parameters residing in memory into harddisk.
[End]
"
::= { VLR_Management 3 }
Status OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
[Begin]
Instance: 1
Length : 1
Default : 00
Field :
Remark :Basic status of VLR.
[End]
"
::= { VLR_Management 4 }
END
Reference in New Issue View Git Blame Copy Permalink