Multisite HLR Coordinator

Top  Previous  Next

Descriptions

 

Multisite HLR Coordinator (MHC) supports distributed HLR across UW R4S nodes of a mesh network through HLR data replication and synchronization. Automatic replication and synchronization of HLR data across multiple UW R4S node sites enable subscribers to register to the Mesh UW R4S GSM network at any nodes ‘locally’. MHC must attaches to a UW R4S HLR - the ‘host’ HLR of the coordinator. The principal duty of MHC is to cooperate with other meshed MHC to synchronize the HLR data among the UW R4S nodes in a mesh network. In order to synchronize the HLR among the nodes of a Mesh UW R4S network, a MHC will broadcast the alterations of its host HLR to other MHC and will update its host HLR according to the alterations received from other MHC. MHC supports dual system architecture of UW R4S HLR. Each HLR of a dual HLR system will has one MHC attached.

 

Each node of a Mesh UW R4S Network requires MHC to provide the Multisite HLR functions. MHC provides multisite HLR networking, data replication, data synchronization and periodic data verification functions. MHC function is transparent to other GSM applications. It doesn’t affect the GSM functions of the UW R4S system.

 

 

See Also

 

MHC Parameter Dictionary

 

 

Feature List

 

Feature

Descriptions

Capacity

Up to 100K postpaid subscribers per node

Up to 16 nodes per segment

Support 2 hierarchical segment structure

Interface

SNMP among MHCs

Basic Services

MO/MT call

Emergency call

Supplementary Services

Call forwarding:

Call forward unconditional (CFU)

Call forward on busy (CFB)

Call forward on not reply (CFNRy)

Call forward on not reachable (CFNRc)

Call barring / Operator determined barring

Barring of All Outgoing Calls (BAOC)

Barring of Outgoing International Calls (BOIC)

Barring of All Incoming Calls (BAIC)

Calling line identification presentation (CLIP)

Calling line identification restriction (CLIR)

Connected line identification presentation (COLP)

Connected line identification restriction (COLR)

Call hold

Call waiting

Explicit call transfer (ECT)

3-party call

Premium call

Password control

Operator specific barring (OSB)

Barring of Outgoing International Calls except those directed towards the Home PLMN Country (BOIC-exHC)

Barring of Incoming Calls when Roaming outside the home PLMN country (BIC-Roam)

Enhanced Services

Short message service

Voice mail service

USSD service

Featured Services

Multisite HLR Data replication

Multisite HLR Data synchronization

Multisite HLR Periodic data verification

Multisite HLR Dual system networking

License Control

MHC application flag

Operation and Maintenance

SNMP network management

IE browser client console

Web page based graphic user interface

Real time status display

System parameter maintenance

Organized call measurements and operation logs

 

 

MHC Parameter Dictionary

 

Parameter

Definition

Range

System

--

--

MHC State

(Read Only) The current status of local MHC. It is read-only and controlled by License.

ON

OFF

CDR Flag

Enable or disable MHC CDR generation.

Synchronization Interval

The time interval between sending successive SYN commands to the destination nodes.

1 - 255 seconds

Verification Interval

The time interval between sending successive verification commands to the destination nodes.

Download Interval

The time interval between sending successive download commands to the destination nodes.

Replication Interval

The time interval between sending successive replication commands to the destination nodes.

Verification Start Time

The start time of daily HLR data verification procedure.

01AM - 12PM

HLR Checksum Field

Enable or disable HLR subscriber checksum for each data fields.

ON

OFF

Replication Rate

The limited number of replicating subscribers per 50ms.

1 - 255

MHC Node

--

Max 16 items

Name

Specify an identifiable name for the MHC node.

--

IP 0

The IP address of the MHC in the first platform.

Dotted decimal format

IP 1

The IP address of the MHC in the second platform. It is available for the dual system node.

Administration State

Control the operation of the managed MHC node.

Unblock = Enable blocked MHC node.

Block = Disable MHC node manually.

Unblock

Block

 

 

Return to

 

Tasks List

 

Elements List

 

 

 

 

 

2.1.1.14