Enabling Notification SMS

Implementation

1.Go to EMS >Configuration >NSS >SMPP.

2.Make sure the System ID at the upper right corner displays SMPP(MSS_Pub), click the button.

3.Click the hyperlinked index number of New to open an Option window.

4.Configure the necessary parameters given in the following table to setup the SMPP connection for the forward direction.

5.Click the button to update parameters to application servers.

6.Repeat steps 3 to 5 to add another SMPP connection for the opposite direction.

Sub-parameter	Description (Click highlight SAVE after change)	Forward Connection	Reverse Connection
Link Alias	Name of the SMPP connection. Enter the PPS inquiry number which configured in PPS >SRF Parameters >SRF Number >Inquiry Number.	PPS Inquiry Number	PPS Inquiry Number
Link Type	Transport protocol of the SMPP connection.	UDP	UDP
Server Type	Specify the application type of the local SMPP entity.	Server	Client
Session Type	Specify how the local SMPP entity shall bind to the remote SMPP entity. Select bindTRX as a transceiver.	bindTRX	bindTRX
System ID	Specify the user name for the gateway to use when connecting to the remote SMPP entity. Enter PPS by default.	PPS	PPS
Password	Specify the password for the gateway to use when connecting to the remote SMPP entity. Enter 123456 by default.	123456	123456
System Type	An optional login parameter that should be set only if required by the remote SMPP entity. Enter GSM by default.	GSM	GSM
Local GTT	Specify the GTT of local SMPP entity. Enter the SMPP-SMSC and SMPP-EMSE E.164 number which configured in SCCP >Local Node.	SMPP-SMSC	SMPP-EMSE
Remote GTT	Specify the GTT of remote SMPP entity. Enter the SMPP-EMSE and SMPP-SMSC E.164 number which configured in SCCP >Local Node.	SMPP-EMSE	SMPP-SMSC
Local IP	Specify the IP address of local SMPP entity. It's not applicable here. Reserved as 0.0.0.0.	0.0.0.0	0.0.0.0
Remote IP	Specify the IP address of remote SMPP entity. It's not applicable here. Reserved as 0.0.0.0.	0.0.0.0	0.0.0.0
Session Init Timer	Specify the maximum time-out value for the time period between an application's network connection setup request and BIND request. If the time-out value is reached, the connection is terminated. Reserved as 5.	5	5
Enquire Link Timer	Specify the minimum time-out period between the SMPP service's sending of ENQUIRE LINK requests to an application. Reserved as 10.	10	10
Inactivity Timer	Specify the maximum time-out period allowed for inactivity between an application’s request towards the SMPP service. If the time-out value is reached, the connection is terminated. Reserved as 5.	5	5
Response Timer	Specify the maximum time-out period allowed between the SMPP service sends a request to an application and a response to the request is received. If the time-out value is reached, the connection is terminated. Reserved as 5.	5	5
Local SSN	Specify the subsystem number of local SMPP entity. Reserved as 0.	0	0
Remote SSN	Specify the subsystem number of remote SMPP entity. Reserved as 0.	0	0
Flag	Enable or disable this SMPP connection.	Enable	Enable

1.Go to EMS >Configuration >NSS >SMSC.

2.Make sure the System ID at the upper right corner displays SMSC_pub, click the button.

1.Click to open the SMPP tab.

2.Click the hyperlinked index number of New to open an Option window.

3.Configure the necessary parameters given in the following table.

4.Click the button to update parameters to application servers.

Sub-parameter	Description (Click highlight SAVE after change)	Recommended Value
Link Alias	It is the same Link Alias as that in the previous SMPP configuration. Use the PPS inquiry number by default.	PPS Inquiry Number
Session Type	Specify how the local SMPP entity shall bind to the remote SMPP entity. Select bindTRX as a transceiver.	bindTRX
Service Number	Enter the PPS balance transfer service number which configured in PPS >SRF Parameters >SRF Number >Inquiry Number.	PPS Inquiry Number
DCS	Data Coding Scheme. Reserved as smpp7def8.	smpp7def8
Platform ID	The served MSC platform. Reserved as Ignore.	Ignore
Time to Live	Define the maximum duration of a pending message which should be kept in sending array till reaches the called subscriber. Messages can't send out in the validity period will be deleted. Unit is second. Reserved as 18 hours.	64800
Manipulation Flag	Enable or disable CLI Manipulation in XAPP setting. Reserved as Disable.	Disable
TON	Indicate Type of Number for destination. Reserved as Unknown.	Unknown
NPI	Indicate Numbering Plan Indicator for destination. Reserved as Unknown.	Unknown

1.Go to EMS >Configuration >NSS >PPS.

2.Make sure the System ID at the upper right corner displays PPS_pub, click the button.

1.Click to open the Service Control >Prompt Resolution tab.

2.Click the hyperlinked index number 0 to open the configuration window.

3.Configure the necessary parameters given in the following table.

4.Click the button to update parameters to application servers.

Sub-parameter	Description (Click highlight SAVE after change)	Optional Values
Currency Resolution	Specify the number of decimal place in the PPS notification short message balance display and audio prompt. For example, balance=1234: n1=1234, n10=123.4, n100=12.34	•n1 •n10 •n100
Date Format	Specify date format in PPS notification short message and audio prompt.	•YYYYMMDD •DDMMYYYY •MMDDYYYY
Currency Symbol Position	Specify the position of the currency symbol in PPS notification short message. •At the front of the balance: $5 •At the rear of the balance: 5$	•Front •Rear

1.Click to open the Service Control >SMS Sentence tab.

2.Click the hyperlinked index number of the sentence wanted to change to open the configuration window.

3.Edit the sentence in the Language x Content line, click highlighted SAVE when it's done.

4.Click the button to update parameters to application servers.

1.Go to EMS >Configuration >NSS >PPS.

2.Make sure the System ID at the upper right corner displays PPS_pub, click the button.

1.Click to open the Service Control >COS tab.

2.Click the hyperlinked index number to open an existing COS table, or click New to create a new COS table.

3.In the Short Message Notification & Inquiry table, configure the necessary parameters given in the following table.

4.Click the button to update parameters to application servers.

Sub-parameter	Description (Click highlight SAVE after change)	Optional Values
Short Message Notification	Attributes of notification short message	--
Successful Recharge	Enable or disable feedback short message of recharge result.	•Enable •Disable
Account Inquiry	Enable or disable feedback short message of balance inquiry.
Expiration	Enable or disable notification short message sending when an account is going to expire.
(Days) Before Expiration	Define the sending days before account expires.	0 - 32 days
Insufficient Balance	Enable or disable notification short message sending when the account's balance is too low.	•Enable •Disable
When Balance Reaches	Define the low balance level to send notification short message. Unit is the minimum currency unit.	0 - 65535
Clear Balance	Enable or disable notification short message sending when the balance is cleared from an expired account.	•Enable •Disable
CAP Plan Upgrade	Enable or disable notification short message sending when the predefined CAP threshold is about to grade up.
Overdraw Balance	Enable or disable notification short message sending when the account takes out an overdraft to pay for the charge.
Rent Charge	Enable or disable notification short message sending when rent is charged.
F&F Registration	Enable or disable notification short message sending when Friends and Family Number plan is registered.
F&F Suspended	Enable or disable notification short message sending when Friends and Family Number plan is suspended.
F&F Exceed Threshold	Enable or disable notification short message sending when Friends and Family Number plan exceeded the free voice call duration or free SMS threshold.
F&F Removed	Enable or disable notification short message sending when Friends and Family Number plan is removed.
Inquiry by Short Message	Attributes of inquiry short message	--
Charge Flag	Enable or disable charge for inquiry short message.	•Charge •Free
Free Inquiry per Day	Define the quantity of free inquiry short messages on a daily basis if charge flag is enabled.	0 - 128

Enabling Notification Short Message